Reply To: re-decking an OK
Hi Andy
if I didn’t recycle it , I’ve got a hardboard pattern for half the foredeck. You can get both pieces out of one 8×4 sheet, but only if one piece is one way up and the other is the other is the other way up, so if it’s a sheet with one fancy veneer, one side has the fancy veneer pointing downward . Here’s a sketch:
so you can only get the foredeck out of one piece if both faces are the same or you’re going to have a paint finish.
Dave
PS. If you’re only doing the foredeck, I just happen to have the two half sheets left from doing 2031. Could you be interested?
