Reply To: Keel Bands – Width and Thickness
Home › Forums › Technical – View only › Keel Bands – Width and Thickness › Reply To: Keel Bands – Width and Thickness
I don’t know of an OK with a maximum keelband. I can not see a problem with what you want to do though I am not sure if it will make an advantage. The rules were drawn from original wood boats where a protective keelband was used. Some people would have wanted to try boats with no band and a smoother underwater shape so the rules require some “band” as a raised bit on the bottom of the boat in the centre.
When they made glass boats the obvious thing was to mould the required shape into the hull, which is what they do.
Usually the glass boats have the centre shape at the front of the c/b case faired into the ones that are each side of the case, this might be what you want to do. When I had a wooden boat I didn’t do that but chamfered off the blunt ends to reduce resistance.
You don’t have to be able to unscrew them and take them off. You can use plastic bands glued on.
Bill













