Reply To: New OK Dinghy Technical and Class Rules microsite
Hi Guys,
Just put this on the ‘comments’ section.
‘I think there’s an error in Diagram 9 (F 3.5 Spars Dims.).
Boom outer band is shown as being measured from the aft face of the mast (‘extended sail track’ aft face) 2640mm Max.
Rule F.4.4 gives boom outer band being 2640mm from ‘gooseneck hole centre’.
I still consider this rule as suspect, as it measures what should be a ‘maximum’ point from the mast (boom outer band), from a
variable point (Gooseneck hole position)’.
Something to think about before the final draft?
Bob.
