2 piece mast?
Home › Forums › Technical – View only › 2 piece mast?
- This topic has 6 replies, 3 voices, and was last updated 18 years, 4 months ago by
GarethT.
-
AuthorPosts
-
17th July 2008 at 3:06pm #360
GarethTParticipantHas anyone ever fabricated a 2 piece mast?
The last barrier to me getting another OK (having convinced the wife) is that I need to tow it behind my high top camper, with an Optimist on top of it, so a once piece mast isn’t feasible.
I’m sure it would be out of class, but could I take an old mast, cut it in 2, then put a tapered insert (perhaps part of another knackered mast) in the join to hold it together, and be able to sail it without iot falling to bits the first time the wind blew.
I’m not looking for it to be competitive, just something to take to Optimist opens so I can have some fun of my own.
If this doesn’t work I might have to get a laser :roll:
17th July 2008 at 10:52pm #2939
davecooperParticipantI don’t think the class rules would have any problem with a 2 piece mast as long as it measured when it was together, Gareth: the idea of the ok rules is to maintain fair racing, not to prevent people doing what they want to do. If you can find one, a proctor/selden mast might be the answer: they ‘re made out of two sections and stuck together in the middle, and quite often seperated at the joint, so the job’s pretty well done for you! In ally, I think it’s just a question of doing the engineering right. Your mast’ll probably have a stiff bit in the middle but I’m sure it’s a practical proposition.
Dave Cooper18th July 2008 at 11:50am #2940
XParticipantWhen Needlespar first started looking into carbon OK masts. They actually offered the masts in either one or 2 piece form, so you could take them apart.
It should also be possible to part a standard needlespar mast at the middle joint (you will need to cut the track). The sections are only glued together with araldite, i would think a hot air gun & some physical persuasion should do the trick. (i have never tried it, But i have seen others do it).
Terry
18th July 2008 at 12:38pm #2941
davecooperParticipantreally Terry?? I’m amazed that araldite resists years of flexing! Evidently does, though. Presumably, the spigot stays in the bottom section, slides out of the top section?
Dave18th July 2008 at 12:48pm #2942
XParticipantWhen Peter Waymouth brought his boat from NZ for the 95 worlds in Felixstowe it came as deck cargo strapped to the top of a container. He took the mast joints apart & put all the bits in his front tank. Then when he picked the boat up he glued it all together again. I think he finished top 3.
18th July 2008 at 1:13pm #2943
davecooperParticipantWell, that’s Gareth’s problem solved! He can stow the mast in the optimist! Just needs to tell his missus that the boom is a component part of the camper awning and he’s totally sorted
dave18th July 2008 at 1:45pm #2944
GarethTParticipantSounds simple …… just need to find an old cheap grp boat (and sell the wife’s topper to pay for it!) and I’ll be sorted.
Thanks for the help.
-
AuthorPosts
- The forum ‘Technical – View only’ is closed to new topics and replies.













