Aluminium OK Hulls
Home › Forums › Gossip – View only › Aluminium OK Hulls
- This topic has 6 replies, 4 voices, and was last updated 17 years, 3 months ago by
mr-mac.
-
AuthorPosts
-
11th July 2009 at 1:32pm #496
Martin WardParticipantI was wondering whether anyone has ever asked whether an aluminum International OK Hull could be built. I know that this is against the current rules, but I was wondering whether it would be possible? A hard chine hull such as an OK’s would be just right to build as aluminum hull. As it would not require painting and will not rust or soak up any weight these hulls should last forever. Would this be good for the Class?
It would also mean leak free boats though the desks would have to be plywood or plastic as aluminum would heat up in the sun. It would also mean that the 72kg of minium weight that the hull must weight would have to be maintained as reducing the hull’s minium weight would mean that metal boats would be uncompetitive.
Does anyone have any thoughts on this.
11th July 2009 at 9:30pm #3694
burtParticipantit would be interesting to see a boat done in this way i have tlooked at aluminum oppies and thought why not but if it gets bashed it will be interesting to fix and if it bashed some one else it could be very expensive
burt
13th July 2009 at 8:06am #3695
davecooperParticipantWow, there’s a thinking outside the box suggestion! Good one, Martin! How practical is it? Looks like the area of the material in an OK is about 12 square metres (hull, deck, bulkheads). The density of aluminium is 2700 kg/cubic metre. I guess we want the hull weight to come in at 60kg without any fittings at all. So the thickness of aluminium we can build out of is
(60 x 1000) / (12 x 2700) = 50/27 = 2mm.
Is 2mm is thick enough to build a hull out of?Dave
(PS. Don’t think there’s any reason for not making the decks out of ally. Some early Fireflies were built with aluminium decks because Faireys couldn’t find any ply for the job. I bet sitting on metal decks froze your bum in winter!)
13th July 2009 at 6:48pm #3696
burtParticipantwell it is metal so probably
20th July 2009 at 8:53pm #3697
mr-macParticipantAlluminium would be no good… However, Glass Reinforced alluminium would be…
Same stuff they make the big airbus out of and luggage holds as it can withstand a bomb going off.
very strong and very light…. Though I would have thought it would be noisey, clattery and hard to work into a final product.
John
24th July 2009 at 10:14pm #3698
Martin WardParticipantGlass Reinforced Aluminium sounds very interesting. Would the epoxy or polyester bond to the aluminium okay? What type or grade of aluminium are we talking about here? How would the hull be finished?
Are you thinking of honeycomb aluminium? The Flying D’s were contructed using honeycomb aluminium as part of a sandwich construction in the 1980’s.
If the hull was made only of aluminium it could constructed very quickly as it could be MIG or TIG welded. Also there are a lot of people who could make it outside the boat building industry. Both factors could keep the cost down and with the saving made by not painting the boat a very strong and cheap boat could be produced.
I would be very interested if anyone has any further information on Glass Reinforced Aluminium.
Regards
Martin
31st July 2009 at 10:56am #3699
mr-macParticipantIt’s called GLARE
http://en.wikipedia.org/wiki/GLARE_(material)
As in the aero industry it would probablly be bonded rather than welded…
I belive http://www.storkindustryservices.nl/ make the stuff…
I guess there are a few options here… Use a similar idea and build hull in aluminium then bond glass on inside… Or maybe the company that make glare would be interested in it’s potential application as a boat building material. In which case they may be intrested in allowing a trial of the materials use (which may keep the costs reasonable).
Also the generic name would be “Fibre Metal Laminate” so be worth a little google about.
John
-
AuthorPosts
- The forum ‘Gossip – View only’ is closed to new topics and replies.













